Wednesday, October 2, 2013

work underway...



(excerpts and  inspirational materials)







..if it's not boiling yet, how can you tell its done...
i  can hear the molecules begin to speed up....





"i'll tell you " 
he said.
 "i'm either way before my time...
or way after."



..so when i was a  girl, i was  a tom-boy to the max..
I  could make the longest skid marks with my bicycle tire, pop the  highest wheelies, and could bare the sting of pine cones against my legs until I reached our fort of hay on the other side of the park. And i still have the scar on my upper  arm from when the boy pushed me down mid race onto a heap of metal 'cause i was already 2 laps ahead of him!

but then there were  the other moments too of course... like the day we  were jumpin the creek...
No problem. This was my fortay! i knew i could clear that creek in one jump without a running start!
Until somebody shouted  "LEECH!" and there in the middle of the creek was a leech this big...

and well, TOM? hmph. Left me! and all the boys were shoutin..."What's you  waitin' for?! Jump!!" My brother. He must have saw it comin. Cause he just looked at me like " ..... (don't. you. dare.)..." They still shoutin for me to come on,  brother still givin' me a solid glare,  but my feet wouldn't move. yep. ..I started to cry. (Oh, it was a shameful day for tom boys that day.)  My brother had to come back to the other side of  the creek to get me. And  worse? He had to HOLD MY HAND! ...as he dragged me to the other side. All the while, i'm still crying and aiming my tip toes like a ballerina at every rock i could find along the  way. ... Come to find out, the leech? Wasn't even a leech. Just a rock under the water, with its tip exposed. It was gonna take me a while to live that one down...





Monday, September 16, 2013

Be More Awesome!







School is back in session.
Met an awesome young man today -- Kasiem.
ah. saw the glow of greatness he is marked with
and with it, he taught me.... 
reminded me that it's all an honor.
direct access to the young human mind and spirit...
a bag of clay.


Tuesday, September 10, 2013

the basics...





I recently ordered a book called "The 100: Most Influential People in Human History"
.... and,  I know by category it's not a human...but, I  vote sesame street to such a list one day...  for future beings to look back upon as they ponder just what was in place to keep the human spirit --the child within watered and fed.  colorful. alive. happy.  ... the basics.  


" it's not down in any map; true places never are"
                                                                     ~ Herman Melville

Thursday, August 29, 2013

how to hollow out a bulb


DIY Hollow Out A Light Bulb

 

http://www.teamdroid.com/diy-hollow-out-a-light-bulb/

When I was growing up I had a keen interest in the sciences. Mostly because of the cool gear that scientists used, you know, beakers, flasks, Bunsen burners that sort of thing. Well, not only did I not have the money for those sorts of thing but I had no idea where to even buy them if I could. So I had to improvise. One of the better improvisations I was able to do was to hollow out a light bulb and use it for other things. The glass that makes the envelope of the build is quite heat resistant and the screw base is good to attach things to (even better if you can find old ones with brass bases, you can solder to those). I made a number of small boilers in order to learn about steam and distillation. I hope to show people that even if a bulb burns out, it can still be useful.
Step 1
Lightbulb project

You will need some common tools, a screwdriver (regular) and snips (or needle nose pliers). Use whatever bulb you have handy. *CAUTION* Never use a fluorescent bulb for this project, no matter how cool it looks. The powder used to coat the inside of them is made from phosphor and is quite toxic. You’re also working with glass, so use eye protection! You can’t see mine because I’m wearing them. You should also use gloves or wrap the bulb in a towel just in case it breaks. Yeah, you can’t see mine because i didn’t have any handy. So do as I say and not as I do, got it?
Step 2
Lightbulb project
First, grip the little solder point and give it a good twist. You will free the brass contact and break one of the wires leading to the filament.
Step 3
Lightbulb project
Once the contact has been pulled out, carefully crack the glass insulator. The chips from this are quite pervasive, they get into just about anything in the area and they are razor sharp. Use caution.
Step 4
Lightbulb project
After the insulator has been removed you can see the inside supports of the filament and the fill hole. In the old days bulbs were evacuated of atmosphere to keep the filament from oxidising and burning through. Now days the glass envelope is back filled with an inert gas like argon. The keeps the filament from burning through and makes the bulbs safer.
Step 5
Lightbulb project
Use the screwdriver to break the fill tube.
Step 6
Lightbulb project
The fill tube could be saved for a later project if you wish.
Step 7
Lightbulb project
You can now shake the filament assembly out of the tube. If the tungsten wire is still intact you could probably find a good use for it. You could make another light bulb if your stuck for something to do I suppose.
Step 8
Lightbulb project
The bulb needs a good cleaning. This powder, is called kaolin and is pretty safe. You should still be careful and keep it away from your mouth and anything you might eat near.
Step 9
Lightbulb project
Mind the sharp bits of glass in the socket when doing this. If you have some stubborn bits inside of it that you can’t get to with this technique you can fill the bulb with a little salt and shake it about. this should scour the powder off the walls.
Step 10
Lightbulb project

Sunday, July 7, 2013

Lesson Planning....




Power of words:
tending to your mind field.
fertile dirt
pull the weeds (life owies, negative words, lil monsters)
plant the seeds (day dream. imagine. speek it write it. claim it in present tense )
 water 
then  the flowers come.


Coffee Filter Flower Illuminated Centerpiece
 









                                                                                                                               (7 marks completion)

Thursday, June 6, 2013

The Sing For Hope Pianos: A Short Documentary





 .

Happy that I get to be a part of this today...gonna paint me a piano!
be sure to stop and play on 'em when you see them...and sing out of tune some too!
lots of love and beauty happening here.
http://www.singforhope.org/about

Thursday, May 9, 2013

Testing out a New Work... May 16th Dixon Place


ANALOG
A short Solo Pefromance

"...And all of this is the schism....
 between internal nature and external obligation...

This. This Is what it feels like to be obligated to Blackness-- Carbon. 
When your insides are made of Cadmium Orange." 

Artwork by Nehprii Amenii and the Lamp Light on my desk. thank u light!



DIXON PLACE
161 Chrystie St.
East Village, NYC

Thurs, May 16th
​6:30-11:00pm

6:30-7:30 Drinks, food, performances in the  Lounge
7:30-9:00 Performances in the Theater
9:30-1100 More drinks, more food, more performances in the Lounge

http://sarahafterhours.wix.com/sarahafterhours




Sunday, May 5, 2013

MP3 onto Blogger ( was determined to figure it out!)


For those struggling with setting up audio consoles within blogger...

not sure what has caused the recent shifts...

but here's what i've figure out--w/ help of the following sites:

step 1: 

http://tips-for-new-bloggers.blogspot.com/2007/02/add-music-to-blogspot-blog.html

the above link provides the html language to create the audio console however, you need a hosting site-- an online space to provide a url of the file. i was using fileden...tried several. things got shaky.

so...

step 2:
follow these steps in the link below  to create a google site:

http://www.bloggertipspro.com/2012/06/add-mp3-files-to-blogger-part-1.html

it has perfectly clear instructions...that do the job!  except my sound file still wouldn't play. ???
hope it works for everyone else tho...

but if not: try my rigging of step  1 and 2

use the html code  of : (from step 1)

autostart="false"
height="40" loop="true" playcount="2" src="URL of music file" width="300"/>
and insert a link hosted by the google site ( from step 2) 


i've been doing a lot of sound design work/audio editing and so, needed this..but oh my! 
this here above tech- blogging-stuff-- this is my 1st and will be my last! so enjoy it! 
 

Note to the brilliant minds of google: blogger is your weakest link in your attempt to take over the world.
step it up please. you can do it!